Brand New P320c Failure To Eject Issues - Page 6 - SIG Talk
SIG Talk Gun Forum

Brand New P320c Failure To Eject Issues

This is a discussion on Brand New P320c Failure To Eject Issues within the P250 & P320 Modular Pistols forums, part of the SIG Sauer Pistols category; Originally Posted by marathonrunner I am sorry to hear you are having these issues. I totally believe you in spite of the fact my P320 ...


Go Back   SIG Talk > SIG Sauer Forum > SIG Sauer Pistols > P250 & P320 Modular Pistols


P250 & P320 Modular Pistols P250, P320, and Exchange kits

Like Tree38Likes
Reply
 
LinkBack Thread Tools Display Modes
Old 12-31-2016, 07:31 AM   #76
Junior Member
 
Join Date: Dec 2016
Location: Kentucky
Posts: 13
Brand New P320c Failure To Eject Issues

Quote:
Originally Posted by marathonrunner View Post
I am sorry to hear you are having these issues. I totally believe you in spite of the fact my P320 compact works fine. I really want to get the Subcompact version as it will fit my hand better than all others, but now I am hesitant. I have 4 Gen4 Glock 30's and they have been bulletproof. The only thing I hate about the G30 is the grip is too big and I had to get an overwatch precision flat face trigger so my small hands could have probably placement. Darn mod costs $135 dollars!


I have the compact and It's been flawless. I got the small grip and even it is a bit too big for my hand but it's manageable. I ordered the x grip mag extension and put it on a 15 round compact mag and went to the gun shop and put it in a small sub compact frame and it fits my hand perfectly. I'm gonna use my compact slide on the small sub grip frame. It's a great fit using the x grip mag extension. Maybe you should try that option? Unless you just hate the longer slide but I like it that way. Top gun supply has a small sub frame for 41 bucks shipped.
DPeter85 likes this.
Darb77 is offline  
Register

Welcome to the SIG Talk Forum dedicated to SIG Sauer Pistols and SIG Sauer Rifles.

We welcome everyone and the community is free to join so register today and become part of the SIG Talk Forum!

Old 12-31-2016, 12:07 PM   #77
Junior Member
 
Join Date: Mar 2016
Location: New Mexico
Posts: 20
My p320c 9mm, runs like a champ. Reloads, factory ammo, no problems.
boris95 is offline  
Old 12-31-2016, 01:16 PM   #78
Senior Member
 
PeaceOfficer's Avatar
 
Join Date: Apr 2014
Location: Johannesburg, South Africa
Posts: 159
Quote:
Originally Posted by Morbidly View Post
If you have plenty of snap caps, load up a magazine and set up your camera phone. Focus on keeping your gun in the exact same position and manually cycle the magazine. Go back to your phone and see if all the rounds ejected and landed in the same area. If they don't and are all over the place, then you probably have an ejector issue. If they do, then try a higher grain load and see if you have the same FTE problem. Could just be a tight recoil spring that needs some good ammo run through it for a couple hundred rounds.
I received similar advice when experiencing almost the same issue with my 229. Switched to full SAAMI spec 9 mm ammo for the next 100 or so rounds and the issue went away. I think the recoil spring needed a bit of working in and the lower powered ammo was simply not enough to get the job done.
dukemason likes this.
PeaceOfficer is offline  
 
Old 12-31-2016, 04:44 PM   #79
Member
 
Join Date: Sep 2016
Location: Houston, TX
Posts: 30
Not sure if you got this resolved yet but the FTE issue is a common one with the 320. Not that this issue is common but among those who have problems: FTE is the main one. I simply called Sig about it, got a packing label sent to me, they replaced the extractor, cleaned it, shot 250 rounds through it, detail cleaned it then sent it back free of charge.

Definitely hit up Sig!
PeaceOfficer and dukemason like this.
txs171 is offline  
Old 01-02-2017, 08:24 PM   #80
Junior Member
 
Join Date: Jun 2016
Location: Illinois
Posts: 16
I've got a 9mm P320 compact I bought in November 2015. First time out I tried to shoot 124gr Blazer Brass, and had multiple FTE. So I changed to Lawman 115 and had no problems. I then tried Winchester white box, and had FTE in every mag. After putting at least 3000 rounds through it, I determined that Perfecta, Lawman, and American Eagle were good to go. Also Gold Dot and HST functioned flawlessly. But I was irritated that Winchester didn't work, since I had about 1000 rounds of it. So I called Sig and told them I heard there was an improved extractor spring pin available, and that I was having FTE with Winchester range ammo. He checked my serial# and said I had the old version spring pin. Since I was having problems, he sent the new part free of charge. Since installing the new spring pin I've shot 300-400 rounds of white box without any failures.
dukemason is offline  
Reply

  SIG Talk > SIG Sauer Forum > SIG Sauer Pistols > P250 & P320 Modular Pistols

Thread Tools
Display Modes


Similar SIG Talk Discussions
Thread Thread Starter Forum Replies Last Post
Failure to Eject Sig10mm SIG Sauer Pistols 0 08-22-2016 12:14 PM


Top Gun Sites Top Sites List

Powered by vBulletin 3.8.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.1
Copyright © 2010 - 2017 SIG Talk. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.SIG Talk is a SIG Sauer Firearms enthusiast's forum, but it is in no way affiliated with, nor does it represent SIG Sauer, Inc. of Exeter, NH.