Cajun Gunworks CZ Pro Package - SIG Talk
SIG Talk Gun Forum

Cajun Gunworks CZ Pro Package

This is a discussion on Cajun Gunworks CZ Pro Package within the Gun Projects forums, part of the Gun Forum category; I've recently gotten into CZs in a big way and have started working on them. I did an MCARBO spring upgrade on a couple of ...


Go Back   SIG Talk > Gun Forum > Gun Projects

Gun Projects Gun Project Forum - Share your firearm projects from simple modifications to extensive gunsmithing

Like Tree3Likes
  • 2 Post By Philipl
  • 1 Post By George16
Reply
 
LinkBack Thread Tools Display Modes
Old 04-22-2020, 03:35 PM   #1
Supporting Member
Supporting Member
 
Philipl's Avatar
 
Join Date: Sep 2013
Location: Dixie
Posts: 1,852
Likes Received 3615
Cajun Gunworks CZ Pro Package

I've recently gotten into CZs in a big way and have started working on them.

I did an MCARBO spring upgrade on a couple of CZ 75s and liked the results. I did a complete Cajun Gun works upgrade on a P07 and was happy.

Today i just finished a Pro Package upgrade on a stainless P 75B. I'm afraid my wife will decide it's hers. It is awesome

Pro package is about $300 DYI and about twice that if you send it in.

Parts include a new firing pin spring, firing pin, firing pin block stop spring, firing pin roll pin, trigger, trigger return spring, hammer, main spring, firing pin block lever and disconnector.

This is my second major redo and it took about 3 hours but I did it in 3 sessions.

The trigger return spring and the firing pin block lever spring are the 2 real nightmares in the rebuild.

that being said my double action pull is 5.5 pounds and single action 2.5. Smooth as silk. The reset is unbelievably short. My wife was absolutely astounded when she shot it (and she has an orange shadow 2).

I would whole heartedly recommend Cajun Gunworks and their products. In fact just ordered the same package for my 97B.
Jonzim48 and tdubya like this.
Philipl is offline  
Register

Welcome to the SIG Talk Forum dedicated to SIG Sauer Pistols and SIG Sauer Rifles.

We welcome everyone and the community is free to join so register today and become part of the SIG Talk Forum!

Old 04-22-2020, 05:47 PM   #2
Senior Member
 
George16's Avatar
 
Join Date: Dec 2017
Location: Jacksonville, Florida
Posts: 1,822
Likes Received 1346
Congrats and good job on having the will power and patience to deal with the firing pin block lever spring. My shadow 2, TSO and Czechmate all have some CGW goodies in them to make them better for competition.
Philipl likes this.
George16 is online now  
Reply

  SIG Talk > Gun Forum > Gun Projects

Thread Tools
Display Modes



Top Gun Sites Top Sites List

Powered by vBulletin 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.1
Copyright © 2010 - 2020 SIG Talk. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.SIG Talk is a SIG Sauer Firearms enthusiast's forum, but it is in no way affiliated with, nor does it represent SIG Sauer, Inc. of Exeter, NH.